Model: B Product introduction:
Type B lifting belt has descending stop function
Pneumatic balancing crane is a kind of loading and unloading equipment using compressed air as the power source
Lifting speed adjustment: Lifting and lowering speed can be adjusted by turning Adjust with the knob on the control module
Floating range: By increasing or decreasing the force acting directly on the suspended load, the load will move upward or downward, and the floating range is approximately above and below the stable position.
Specifications
< > Model
< > Air pressure
()
< > Maximum lifting weight
()
< > Lifting height
()
< > Weight
()
< > Cable diameter
()
< > Air inlet
< br/> < r B
< > .
< >
< r .
< r
< r
.
< r
< > .
< >
< > .
< >
< br/> < > .
< >
< r B
< > .
< >
< r .
< r < br/>
< > .
< >
< > .
< >
< > .
< >
< r B
< > .
< >
< r .
< r
< > .
< >
< > .
< >
< > .
< >
Features:
Grip-type controller: The handle-type controller provides more sensitive control of the lifting height
Lowering stop: An additional safety measure to suspend the load even in the event of air supply cutoff or hose rupture. Nor will it fall.
Energy saving: The air consumption of the pneumatic balancing crane is only one-seventh of that of the pneumatic hoist (compared to the company's existing products)
No lubrication is required for cleaning and no oil mist is generated
Quiet: Pneumatic balancing crane has no pneumatic motor. Minimal noise during operation
Small lifting without descending stop function
Features:
Economical
Energy saving: The air consumption of the pneumatic balancing crane is only one-seventh of that of the pneumatic hoist ( Compared with the company's existing products)
Cleaning: No lubrication is required. No oil mist is generated
The quiet pneumatic balancing crane has no pneumatic motor. Minimal noise during operation
< > Model
< > Air pressure
()
< > Maximum lifting weight
()
< > Lifting height
()
< > Weight
()
< > Cable diameter
()
< > Air inlet
< br/> < r B
< > .
< >
< r .
< r
< r
.
< r
< > .
< >
< > .
< >
< br/> < > .
< >
< r B
< > .
< >
< r .
< r < br/>
< > .
< >
< > .
< >
< > .
< >
< r B
< > .
< >
< r .
< r
< > .
< >
< > .
< >
< > .
< >
B Fully automatic module
Automatic balancing uses a fully automatic module, and the pneumatic balancing crane can automatically adjust itself to the weight of the suspended load. so. Loads can be raised and lowered manually without a controller.
Lifting speed adjustment The lifting speed can be adjusted by turning the knob on the control module.
Features:
The automatic balancing module can identify the weight of the suspension device within the range of ~maximum lifting weight. Therefore, balance control is possible.
Lowering stop: Even if the air supply is cut off, the suspension device will not fall
Energy saving: The air consumption of the pneumatic balancing crane is only one-seventh of that of the pneumatic hoist (compared to the company's existing products
Clean: No lubrication is required, no oil mist is produced
Quiet: The pneumatic balancing crane has no air motor and is extremely noisy during operation
< > Model
< > Air pressure
()
< > Maximum lifting capacity
()
< > Lifting height
()
< > Weight
()< br/> < > Cable diameter
()
< > Air inlet
< r B
< > .
< >
< r .
< r
< r
.
< r
< > .< br/> < >
< > .
< >
< > .
< >
< r B
< > .
< >
< r .
< r
< > .
< >
< > .
< >
< > .
< >
< r B
< > .
< >
< r .
< r
< > .
< >
< > .
< >
< > .
< >
Original imported Japanese Endo pneumatic balancing crane